WASD / Snap Tap (SOCD) Test

Hold A, add D, release D, then repeat in reverse (D → A) to detect your keyboard's SOCD / Snap Tap mode.

Hold A, then add D (both held), then release D — repeat in reverse (D → A) to detect Snap Tap / SOCD behavior.
Num Lock Caps Lock Scroll Lock
Num
/
*
-
7
8
9
+
4
5
6
1
2
3
Enter
0
.
Keyboard Size
Keyboard Layout
Not started
W
A S D
A → D —
D → A —
Key return: — Switch gap: —
Live dual-track signal (last 4 s)
A
D

Browsers can detect Snap Tap / SOCD key order, but cannot measure magnetic actuation depth or Rapid Trigger mm.

Due to OS-level limits, some keys or combos may not register — this is neither a bug nor a fault of your keyboard. Learn why

On Mac (and some Windows laptops) the F1–F12 keys need a modifier key (e.g. Fn) to work — keep this in mind while testing.

How to test & SOCD visual guide

SOCD (Simultaneous Opposite Cardinal Directions) defines how your keyboard resolves holding opposing keys like A and D at the same time. Test both orders so a fixed single-key bias is not mistaken for Snap Tap:

4-step bidirectional check
1. Hold A → 2. Keep A, add D → 3. Release D (check return) → 4. Repeat D → A
SOCD signal patterns (Blue = A, Green = D)
Both Active (Raw)
Last Input (Snap Tap)
Neutral (Cancel)

Note: Browsers can accurately detect Snap Tap (SOCD) key order and key return, but magnetic actuation depth and Rapid Trigger sensitivity are handled inside the keyboard firmware and cannot be read by any web page.

Frequently asked questions

What is Snap Tap / SOCD?

Snap Tap (called Snappy Tappy on Wooting boards) is Last Input Priority SOCD: when you hold A and press D, the firmware automatically releases A so D activates immediately, then restores A if you release D while still holding A.

Why test both A → D and D → A?

Testing both directions distinguishes true Last Input Priority from a fixed single-key priority where one direction always wins regardless of order.

Is Snap Tap allowed in CS2?

No. Valve banned automated Snap Tap / SOCD strafing on official CS2 servers and kicks detected players from matches. Check the rules of each game or tournament.

Recommended test order

Keyboard & Mouse

You are here

Keyboards and mice are the input devices you use every day. Make sure to run the Keyboard Rollover Test, Keyboard Chatter Test, Mouse Double-click Test and Mouse Polling Rate Test — they catch key conflicts, double-typing and faulty switches while you can still return the device.

Screen & Refresh Rate

A newly bought monitor is a must-test — especially the Dead Pixel Test, Backlight Test, Grayscale Test and the Screen Refresh Rate Test. Phone screens are supported too — just remember to open the site in your phone browser for the Phone Screen Test.

Speakers, Microphone & Webcam

For audio input and output, start with the Speaker Channel Test, Speaker Sweep Test, a quick Microphone Test and the Microphone Noise Test to confirm stereo balance, frequency response and a clean noise floor; the Webcam Test rounds it off with a check on image quality, smoothness and noise.

GPU & Gamepad

Need GPU muscle or big into gaming? Run the Volumeshader_bm GPU Test to stress your graphics card, then pick up the Gamepad Test and check the Controller Drift Test and Controller Rumble Test while you are at it.