Mouse Test
Every button, the wheel, polling rate, double-click faults and movement smoothness. For professional mouse configuration and debugging, click here i
Mouse Test 3D is here · Four-color GPW · Try it now
Start nowMouse Test 3D may use more system resources. Use at your discretion.
Progress
Some buttons may be mapped to browser/system actions (side = back/forward, middle = auto-scroll, right = context menu). This page suppresses those during testing — the mouse only registers each press. Learn why
If a browser or driver still triggers an action, remap that button away from its default (e.g. in your driver) and test again — that is a system setting, not a fault.
Mouse tests
Mouse Test
: Press every button — left, right, middle, side and wheel — to check each one works. NormalEvery button — left, right, middle, side and wheel click — lights the moment you press it, and the wheel scrolls smoothly. AbnormalA button stays silent, double-fires, or the wheel skips steps — a worn microswitch or encoder; retest a few times to confirm.Polling Rate Test
: Track event frequency in real time to estimate your polling rate and judge performance. NormalLive readings hold steady near the rated rate — 125 Hz for office mice, 500–1000 Hz for gaming, 4000–8000 Hz for flagship gear. AbnormalReadings sit far below spec or jump around — check surface, USB port, wireless interference and driver settings before blaming the sensor.Double-click Test
: Record the interval between clicks to catch aged switches turning one click into two. NormalClicking at a normal pace records no double-fires; a deliberate human double-click lands at 100 ms or more. AbnormalOne click registers two presses, or repeats land inside the 50 ms threshold — a classic aged microswitch; contact cleaner or a switch swap fixes it.CPS Test
: Click as fast as you can inside a countdown to measure your clicks per second. NormalEvery click is counted and the score is stable; most people click 5–8 CPS, skilled players 10–16. AbnormalClicks go missing or fire double at a normal pace — run the double-click test to confirm a switch fault.Smoothness Test
: Hold the left button and draw to check cursor smoothness and dropped frames. NormalHeld-button circles and lines stay continuous with no breaks, and average spacing stays small and even. AbnormalJagged steps, gaps or jumps in the trail — usually a low polling rate, dirty sensor window or a worn mousepad.Size Comparison
: Calibrate with a bank card and render any mouse at real size — put your hand on the screen to compare. NormalAfter calibrating with a bank card, the on-screen outline matches the real mouse 1:1 at true scale. AbnormalSizes clearly off means browser zoom or OS display scaling is not at 100% — fix scaling or recalibrate before judging the tool.Why choose My PC Tester?
Realistic on-screen mouse
A lifelike mock of a real mouse — every button including the wheel and side buttons lights up the instant it is pressed, so the test is intuitive and spots a faulty button at a glance.
Five-in-one testing
Combines a button check, polling-rate measurement, double-click diagnosis, a CPS speed challenge and movement-smoothness analysis — full mouse coverage in a single tool.
Install-free, data private
Runs on your browser’s native Web APIs — nothing to install. All test data is processed locally on your device and never sent to any server.
Cross-platform
Works on Windows, macOS and Linux across Chrome, Edge, Firefox and Safari. Wired, wireless or Bluetooth mice all test fine.
How to start testing
- 01 · Button test
Move the cursor into the test area, then press the left, right, middle and side buttons one by one and watch whether the matching button lights up.
- 02 · Wheel check
Scroll the wheel up and down inside the test area and confirm the feedback is smooth and the direction matches your input.
- 03 · Review results
Check the results panel to confirm every button and the wheel have lit up — that means everything works.
Test principle: why some buttons never respond
A mouse click travels from your hand to the browser through two gates — whatever stops it may be the system, the browser or a driver, not necessarily a broken mouse.
Gate A — the system / driver layer: side buttons mapped to back/forward, the middle button triggering auto-scroll, or driver / software remapping. This decides whether the browser can receive the action — and a remapped button may trigger something else entirely. An action stopped here is completely silent in the page (not even one mousedown) — that is not a bug, the action never reached the browser.
Gate B — the browser layer: e.g. back/forward navigation, the right-click context menu, middle-button auto-scroll. This decides whether the browser also runs its own default action on top. This page suppresses those defaults across the whole page while you test, so the mouse only registers each press — nothing else is triggered. On fullscreen in Chromium browsers (Chrome / Edge) a few more can be blocked, but a browser or OS-level mapping can still slip through.
Only when every gate lets a press through does it reach the page and register. So if one button does not respond, there is no need to worry — it may be mapped to a system function like back/forward; remap it with your driver or adjust the system setting and test again. It is not necessarily a hardware fault.
| Layer | Example actions | Browser, not fullscreen | Browser, fullscreen |
|---|---|---|---|
| Browser-level default actions | Side = back/forward, right-click menu, middle auto-scroll | Can block | Can block |
| Browser-level (stubborn) | Some browsers / systems still use their own handling | Not always | Mostly blockable |
| Operating-system level | Driver remap, side = back/forward, global hotkeys | Cannot block | Cannot block |
Mouse Test 3D
Click the “Start now” button above the tester and the test area switches to Mouse Test 3D: a real 3D mouse model demonstrates every button press, wheel spin and side-key press in real time. The tests and pass criteria are identical to the flat view — left / middle / right buttons, wheel and both side keys tick off one by one, with a fireworks celebration when everything passes.
Exclusive to Mouse Test 3D
One-click black / white / pink / blue color schemes; fireworks and a congrats toast when all buttons pass; a MyPCTester.COM watermark centered in the test area (can be turned off); fullscreen mode. The sidebar also offers double-click threshold detection (20–100 ms), live polling rate (current / average / peak) and a smoothness drawing pad.
Performance note
Mouse Test 3D loads a ~0.7 MB model and uses more graphics power. If it stutters, simply refresh the page to return to the flat view and keep testing; the “Back” button in Mouse Test 3D also switches back at any time.
Frequently asked questions
How do I check my mouse’s polling rate?
Switch to the polling-rate test in the tester above and keep the mouse moving — the live panel shows the report rate in Hz within a second or two. No software or driver install is needed, and unlike vendor tools that only read their own mice, it works for any brand.
How do I check the polling rate in Windows 11?
Windows 11 does not show the polling rate anywhere in Settings — it is a property of the mouse, not the OS. The quickest way is a browser test: open the polling-rate test above in Chrome or Edge, prefer a wired connection for the truest reading, and move the mouse — the Hz you see is the rate your PC is receiving.
How do I test if my mouse is double clicking?
Switch to the double-click test in the tester above and click at a normal pace for 30 seconds or so. Every press draws a bar on the timeline; when one physical click registers two presses less than 50 ms apart, the tool flags a double-fire — the classic symptom of a worn microswitch. Clicking at your normal speed, not spamming, is what reveals the fault.
How do I know if my mouse is working properly?
This page is that check. Press every button, roll the wheel and move the pointer inside the tester — each event lights up the matching button or counter, so a dead switch, a broken scroll wheel or skipping tracking shows up in seconds.
Do the side buttons trigger back / forward navigation during testing?
This page suppresses the browser’s default back / forward, middle-button auto-scroll and other system mouse actions across the whole page — the mouse only registers a button press and never navigates away. If a particular browser or driver still interferes, remap the side buttons away from back / forward (e.g. with your driver) and test again.
Why does my wheel get no response?
Make sure you scroll inside the test area. If the page still ignores it, the wheel encoder may be faulty or the browser incompatible (Chrome or Edge recommended).
Is this mouse tester paid?
Completely free, nothing to install — open a browser any time and check the health of your mouse.
Can I use it on a phone or tablet?
If a mouse is connected via OTG or Bluetooth you can navigate to this page and test. Mobile input works differently, though, so some side buttons may not be recognized due to system limits.
Side buttons fine here but dead in games — why?
The hardware is fine. In-game failures usually come from wrong bindings in the game or missing official drivers — check your in-game button map.
How is Mouse Test 3D different from the standard mouse test?
The tests and pass criteria are identical (left / middle / right, wheel, both side keys — ticked off one by one). The difference is presentation: Mouse Test 3D shows a real 3D model animating every press and wheel spin, plus four color schemes, pass fireworks, a centered watermark and fullscreen — switch with the button above the tester.
Mouse Test 3D fails to load or stutters — what now?
The model is about 0.7 MB and is cached after the first load. If loading fails you will see a notice; if it stutters, refresh the page to return to the flat view — testing is never blocked.
Does Mouse Test 3D work on phones or tablets?
It opens and shows the 3D model, but the test itself needs a physical mouse — use a desktop for real testing. Mobile GPUs are weaker; refresh to return to the flat view if it stutters.
Mouse types
By shape & grip
- Sensor & DPI basics: higher DPI isn't higher accuracy — tracking speed limits matter more, so pick sensitivity that keeps cursor motion smooth.
- Symmetric: ambidextrous and easy to switch grips.
- Ergonomic: follows the palm contour to reduce wrist strain.
- Vertical: an upright hold designed to relieve carpal pressure.
- Grips — palm / claw / fingertip — decide the length, height and waist curve you need.
By working principle & use case
- Optical: currently the mainstream — captures displacements through optical sensors.
- Mechanical (trackball): obsolete today.
- Office: comfort and quiet clicks · Gaming: speed, precision and lightweight · Design: extra programmable buttons for pro software.
Connection methods & core metrics
Connection methods
- Wired: the lowest latency ceiling.
- 2.4G wireless: closest to wired latency — the esports pick.
- Bluetooth: great for multi-device switching and low power.
Core metrics
- Polling rate: higher = more position reports per second = snappier feel.
- Latency: the total time from input to response — lower is better.
- DPI: sensitivity — higher DPI moves the cursor further for the same physical distance.
Marketing specs often differ from reality — measure real polling rate, click latency and DPI accuracy with the tester here.
Mouse structure
Inside-out: every part has a job
- Main controller — the "brain": processes sensor data and talks to your PC.
- Optical sensor — the "eye": decides how accurately it tracks every movement.
- Microswitch — the "joint": defines click feel, sound and lifespan.
- Shell & feet: honeycomb holes cut weight; PTFE feet give smooth gliding.
Buttons & customization
- Beyond left/right/wheel, side buttons, a DPI switch, programmable keys and wheel-tilt cover office, gaming and design needs.
- Swapping and tuning sensors, switches, shells and feet is the rising "custom mouse" scene.
Sensor & microswitches
Sensor
- Optical: LED-based, the choice for most gaming mice.
- Laser: works on more surfaces but is niche for gaming.
- Judge by DPI range, IPS (fast-flick tracking) and 1:1 no acceleration.
- Flagship optical sensors: PixArt PAW3395 / PAW3950.
Real DPI deviation, polling stability and trajectory consistency are best checked with a tester — not the box.
Microswitches
- Common brands: Omron, Kailh, Huano, TTC — they differ in force, rebound and lifespan (tens of millions to 100M+ clicks).
- Optical switches use light instead of metal contacts — faster response and no double-click aging.
- High-speed click testing reveals aging switches before they let you down in-game.
Mouse care
Daily care
Wipe the shell, seams and wheel with a dry cloth or a slightly damp cotton swab regularly, so grime does not build up and hurt feel and response.
Sensor lens
Dust or hair on the sensor lens under the mouse causes tracking jumps — clean it with a cotton swab or canned air from time to time.
Mousepad upkeep
A dirty or worn mousepad lowers tracking accuracy — clean it regularly or replace it when needed.
Keep liquids away
Liquid seeping into the mouse can ruin the switch and PCB — keep it well away from water cups.
Wireless battery
Switch off a wireless mouse you won’t use for a while, or lower its polling rate, to stretch battery life.
Buying guide
Use cases
- Office: ergonomic shape + quiet switches.
- Gaming: lightweight, high-performance sensor, low-latency wireless.
- Design: extra programmable buttons for pro shortcuts.
Shape & weight
- Symmetric suits most grips; ergonomic is easier on the hand for long sessions; vertical helps relieve wrist issues but needs adaptation.
- Lightweight (≈50–70 g) suits fast flicks; heavier (90 g+) feels more "planted" for stable control.
Sensor & switches
- On a budget: mature mid-range optics; on a bigger budget: flagships like PAW3395 / 3950.
- Office: prefer quiet switches; gaming: value actuation speed and optical switches.
- Not sure? Test DPI accuracy, polling and latency before upgrading.
Brands
- International: Logitech, Razer, Corsair, Zowie — long-standing tuning and QC.
- Value brands: Rapoo, Darui, Pulsar, EDL — strong lightweight design and price/performance.
- Esports/niche: Finalmouse, Lamzu — extreme lightweight and small-batch designs.
Recommended test order
Keyboard & Mouse
You are hereKeyboards and mice are the input devices you use every day. Make sure to run the Keyboard Rollover Test, Keyboard Chatter Test, Mouse Double-click Test and Mouse Polling Rate Test — they catch key conflicts, double-typing and faulty switches while you can still return the device.
Screen & Refresh Rate
A newly bought monitor is a must-test — especially the Dead Pixel Test, Backlight Test, Grayscale Test and the Screen Refresh Rate Test. Phone screens are supported too — just remember to open the site in your phone browser for the Phone Screen Test.
Speakers, Microphone & Webcam
For audio input and output, start with the Speaker Channel Test, Speaker Sweep Test, a quick Microphone Test and the Microphone Noise Test to confirm stereo balance, frequency response and a clean noise floor; the Webcam Test rounds it off with a check on image quality, smoothness and noise.
GPU & Gamepad
Need GPU muscle or big into gaming? Run the Volumeshader_bm GPU Test to stress your graphics card, then pick up the Gamepad Test and check the Controller Drift Test and Controller Rumble Test while you are at it.