Keyboard Latency Test
Fast-alternate two keys (e.g. J and K) — see your minimum interval and estimated report rate.
Due to OS-level limits, some keys or combos may not register — this is neither a bug nor a fault of your keyboard. Learn why
On Mac (and some Windows laptops) the F1–F12 keys need a modifier key (e.g. Fn) to work — keep this in mind while testing.
About this test
This test measures the shortest interval between any two presses and estimates the report rate from it: an 8 ms minimum ≈ 125 Hz, 2 ms ≈ 500 Hz, 1 ms ≈ 1000 Hz. The result line updates live with "Min interval X ms · est. report rate Y Hz".
How it works: readings come from high-resolution browser event timestamps, so they cover the whole input path — keyboard, operating system and browser rendering. That makes them a real-world reference rather than a USB hardware measurement.
How to test: pick two comfortable keys (J and K work well) and alternate them as fast as you can for 5-10 seconds. The tester keeps the minimum interval seen. Run a few rounds and trust the stable value.
How to test your keyboard polling rate
Your keyboard's polling rate is how often it reports its state to the PC — 125 Hz, 500 Hz and 1000 Hz are the common tiers. Higher rates mean a press reaches the page sooner, which lowers keyboard delay and input lag in games.
This page doubles as a polling rate test: alternate two keys as fast as you can and the tester converts your minimum press interval into an estimated report rate (8 ms ≈ 125 Hz, 2 ms ≈ 500 Hz, 1 ms ≈ 1000 Hz). The same reading works as a keyboard response time test — that minimum interval is the fastest response your whole input chain can produce.
Tips for a clean reading: close heavy background apps, prefer a wired connection, run 3-5 rounds and take the stable minimum. If the number is far off the spec sheet, check USB power saving and wireless interference before blaming the hardware.
Frequently asked questions
What latency is normal?
Browser readings of 10-30 ms are normal system latency. An esports board with a high polling rate may dip under 10 ms. If you consistently see more than 50 ms, check for wireless interference, USB power saving and background load.
Does this measure the real polling rate?
No. The browser has no access to USB polling data — it can only estimate from event intervals (for example, a 1 ms minimum interval ≈ 1000 Hz). Treat the Hz figure as a reference, not a hardware measurement.
What does a 1000 Hz polling rate mean?
The keyboard sends 1,000 reports per second — roughly 1 ms of theoretical latency. It reduces input lag and sharpens game feel, though for office typing the difference is barely noticeable.
Recommended test order
Keyboard & Mouse
You are hereKeyboards and mice are the input devices you use every day. Make sure to run the Keyboard Rollover Test, Keyboard Chatter Test, Mouse Double-click Test and Mouse Polling Rate Test — they catch key conflicts, double-typing and faulty switches while you can still return the device.
Screen & Refresh Rate
A newly bought monitor is a must-test — especially the Dead Pixel Test, Backlight Test, Grayscale Test and the Screen Refresh Rate Test. Phone screens are supported too — just remember to open the site in your phone browser for the Phone Screen Test.
Speakers, Microphone & Webcam
For audio input and output, start with the Speaker Channel Test, Speaker Sweep Test, a quick Microphone Test and the Microphone Noise Test to confirm stereo balance, frequency response and a clean noise floor; the Webcam Test rounds it off with a check on image quality, smoothness and noise.
GPU & Gamepad
Need GPU muscle or big into gaming? Run the Volumeshader_bm GPU Test to stress your graphics card, then pick up the Gamepad Test and check the Controller Drift Test and Controller Rumble Test while you are at it.