Color Saturation Test

Assess your monitor’s color performance with vivid solid colors.

▶ Start test · Saturation

Judge how vivid and even the saturated colors are. Arrow keys switch between colors. a total of 8 steps

💡 Operation tips
  1. Click the right half of the screen to move to the next view; when the current project’s views are done it advances to the next project, and when every project is finished it exits fullscreen automatically.
  2. Click the left half of the screen to go back to the previous view; at the very first view it stops.
  3. After entering fullscreen, the top label and bottom buttons auto-hide after 3 seconds so you can view the screen unobstructed.
  4. Hover in the bottom-centre of the screen for 1 second to bring the label and buttons back; move away and they hide again after 1 second.
  5. The breathing test ends automatically after about 10 seconds.

Color saturation & gamut testing

The saturation test shows highly saturated solid colors to gauge color reproduction and gamut coverage. A wider gamut means more colors available, so images look richer and more vivid.

Common gamut standards:

sRGB: the baseline gamut, ~35% of visible spectrum; most web content and photos are built around it.

DCI-P3: the cinema standard, ~25% larger than sRGB; common on Apple devices and premium monitors.

Adobe RGB: the print standard, far wider in cyan-green; essential for pro photography and print design.

Rec.2020: an ultra-wide gamut covering ~75% of visible spectrum; only a few OLEDs come close today.

How to judge color:

Whether each solid is vivid and clean with no obvious tint.

Whether the red, green and blue (RGB) primaries are rich rather than washed out or gray.

Whether similar colors are clearly distinguishable.

RGB shift: magenta or cyan pushes usually mean wide-gamut overdrive — judge colors here first, then calibrate your profile.

FAQ

What is color saturation?

Saturation is how pure and vivid a color is. High saturation means more vibrant colors. But gamut coverage alone doesn’t imply accuracy — you also need good color accuracy (Delta E).

What are the common gamut standards?

sRGB: the baseline, ~35% of visible spectrum, good for daily and web use. DCI-P3: the cinema standard, ~25% larger than sRGB, common on Apple and premium monitors. Adobe RGB: the print standard, wider in cyan-green. Rec.2020: ultra-wide, only a few OLEDs come close.

How do I judge good color?

Whether each solid is vivid and clean with no obvious tint; whether the red/green/blue primaries are rich rather than washed out; and whether similar colors are easy to tell apart. For pro work, verify Delta E with a calibrator.

Is wider gamut always better?

Depends on the use case: design and cinema need wide gamut (DCI-P3/Adobe RGB), but everyday users may find oversaturation to be too vivid. Match the gamut to your main work instead of chasing the biggest number.

Recommended test order

Keyboard & Mouse

Keyboards and mice are the input devices you use every day. Make sure to run the Keyboard Rollover Test, Keyboard Chatter Test, Mouse Double-click Test and Mouse Polling Rate Test — they catch key conflicts, double-typing and faulty switches while you can still return the device.

Screen & Refresh Rate

You are here

A newly bought monitor is a must-test — especially the Dead Pixel Test, Backlight Test, Grayscale Test and the Screen Refresh Rate Test. Phone screens are supported too — just remember to open the site in your phone browser for the Phone Screen Test.

Speakers, Microphone & Webcam

For audio input and output, start with the Speaker Channel Test, Speaker Sweep Test, a quick Microphone Test and the Microphone Noise Test to confirm stereo balance, frequency response and a clean noise floor; the Webcam Test rounds it off with a check on image quality, smoothness and noise.

GPU & Gamepad

Need GPU muscle or big into gaming? Run the Volumeshader_bm GPU Test to stress your graphics card, then pick up the Gamepad Test and check the Controller Drift Test and Controller Rumble Test while you are at it.