Focus Test
Look at text and line edges to check display sharpness.
Check whether text, lines and shapes are crisp and sharp. Arrow keys switch modes. a total of 5 steps
- Click the right half of the screen to move to the next view; when the current project’s views are done it advances to the next project, and when every project is finished it exits fullscreen automatically.
- Click the left half of the screen to go back to the previous view; at the very first view it stops.
- After entering fullscreen, the top label and bottom buttons auto-hide after 3 seconds so you can view the screen unobstructed.
- Hover in the bottom-centre of the screen for 1 second to bring the label and buttons back; move away and they hide again after 1 second.
- The breathing test ends automatically after about 10 seconds.
Focus & sharpness testing
The focus test shows text, lines and shapes of various sizes to assess sharpness. Good focus means crisp letter edges and fine lines with no fuzz.
What each pattern checks:
Large text: whether big letter edges are clean, with no blur or ghosting.
Small text: legibility of tiny text and distinguishing similar characters (like i/l/1, o/0).
Thin lines: whether 1 px lines stay continuous without breaks.
Fine grid: whether an ultra-fine grid is even and undistorted.
Circles & curves: whether curved edges are smooth with no jaggies.
What affects sharpness:
Use the panel’s native resolution — anything else interpolates and blurs.
Check that the OS scale factor is an integer (100%/200%).
ClearType (Windows) or font smoothing (macOS) affects text rendering.
FAQ
Why do my text edges look blurry?
The most common cause is not using the native resolution (interpolation blurs it), or a non-integer scale factor (like 125% instead of 100%/200%). Also check that ClearType (Windows) or font smoothing (macOS) is on.
How do I judge focus?
Look for crisp, ghost-free large-letter edges; legible small text; continuous 1 px lines with no breaks; and a fine grid that is even and undistorted. Smooth, anti-aliased shapes mean all is well.
Is a soft-looking monitor out of the box a hardware fault?
If it’s still blurry after confirming the native resolution and integer scaling, it may be the panel pixel layout or circuitry — contact support. But most “blur” comes from scaling or driver settings.
What does the focus test do for text workers?
Sharpness directly affects comfort in long reading and coding sessions. This tool uses large/small text, thin lines, grids and shapes to tell you whether your current resolution and scaling are optimal.
Recommended test order
Keyboard & Mouse
Keyboards and mice are the input devices you use every day. Make sure to run the Keyboard Rollover Test, Keyboard Chatter Test, Mouse Double-click Test and Mouse Polling Rate Test — they catch key conflicts, double-typing and faulty switches while you can still return the device.
Screen & Refresh Rate
You are hereA newly bought monitor is a must-test — especially the Dead Pixel Test, Backlight Test, Grayscale Test and the Screen Refresh Rate Test. Phone screens are supported too — just remember to open the site in your phone browser for the Phone Screen Test.
Speakers, Microphone & Webcam
For audio input and output, start with the Speaker Channel Test, Speaker Sweep Test, a quick Microphone Test and the Microphone Noise Test to confirm stereo balance, frequency response and a clean noise floor; the Webcam Test rounds it off with a check on image quality, smoothness and noise.
GPU & Gamepad
Need GPU muscle or big into gaming? Run the Volumeshader_bm GPU Test to stress your graphics card, then pick up the Gamepad Test and check the Controller Drift Test and Controller Rumble Test while you are at it.